Crafted from 316L stainless steel, this VS Factory Seamaster Diver 300M configuration uses a 42 mm case with the black wave dial and black ceramic bezel combination. The polished black ceramic bezel carries a white diving scale, giving the watch its main sport-diver visual frame without relying on a brighter dial color.
The laser-engraved black wave dial is the key identifier for this version. In QC photos, check that the wave pattern looks even across the dial, the printed text is centered and clean, and the skeletonized hands and raised hour markers sit straight against the minute track. The hands and markers are described as having Super-LumiNova coating, so the application should look consistent in close-up images.
Inside is the VS Calibre 8800 automatic movement, visible through the sapphire crystal case back. Treat movement presentation as a visual QC point: request clear case-back photos and check the rotor, bridge decoration, and overall alignment, while avoiding assumptions about verified timing performance unless test data is supplied.
The stainless-steel Milanese mesh bracelet gives this black wave dial version a softer and slightly dressier profile than a rubber strap or standard link bracelet. For QC, review the mesh finishing, bracelet end fit, clasp area if visible, and how evenly the bracelet sits against the case.
Configuration Details
| Factory context | VS Factory | Confirm the exact version in current QC photos |
| Model family | Omega Seamaster Diver 300M replica | Black wave dial configuration |
| Case | 42 mm, 316L stainless steel | Check case brushing, polishing transitions, crown, and helium-valve positioning |
| Bezel | Black ceramic bezel with white diving scale | Check triangle, pip, and minute-scale alignment |
| Dial | Black laser-engraved wave dial | Check wave depth, marker centering, and dial text placement |
| Bracelet | Milanese mesh stainless steel | Check mesh finishing, end fit, and clasp finishing if shown |
| Movement | VS Calibre 8800 automatic movement | Visible case-back presentation; timing data not specified |
| Unspecified items | Thickness, lug width, wrist range, weight, clasp type, water resistance | Do not infer these from the model name alone |
QC Photo Checklist
Before confirming this VS Factory Seamaster Diver 300M black wave dial, ask for straight-on dial, bezel, side-case, bracelet, and case-back photos. The most useful checks are bezel triangle alignment at 12, even spacing of the white bezel scale, centered hour markers, clean hand finishing, consistent lume fill, balanced crown and helium-valve placement, and a clear movement view through the sapphire crystal case back.
This version is best suited to buyers who want the black Seamaster Diver 300M look with the more refined Milanese mesh bracelet. It is not ideal for buyers who need verified water resistance, official documentation, or confirmed technical specifications beyond the details shown in the listing and QC photos.
Buyer Questions
What identifies this as the black wave dial VS Factory version?
The supported identifiers are the VS Factory context, black laser-engraved wave dial, black ceramic bezel with white scale, 42 mm stainless steel case, Milanese mesh bracelet, and VS Calibre 8800 automatic movement.
What should I check first in QC photos?
Start with dial alignment, wave pattern consistency, bezel triangle position, marker centering, hand finishing, bracelet fit, and the case-back movement view.
Is water resistance confirmed?
No. Water resistance is not specified in the provided product details and should not be assumed from the Diver 300M name.
Are all technical specs available?
No. Thickness, lug width, clasp type, wrist range, weight, and verified timing data are not provided, so they should be confirmed separately if important to your decision.
Confirm This Configuration
Request current QC photos to confirm the exact black wave dial, black ceramic bezel, Milanese mesh bracelet, and VS Calibre 8800 case-back presentation before choosing this configuration.
Design Background
This VS Factory Seamaster Diver 300M configuration is centered on the black wave dial and black ceramic bezel, giving the watch a darker, more restrained diver-style profile than brighter blue, white, or two-tone Seamaster variants. The white bezel scale, skeletonized hands, and raised hour markers keep the front view legible and visually layered, while the black dial makes alignment, marker placement, and wave-pattern consistency especially important in QC photos.
The listed 42 mm 316L stainless steel case provides the core Seamaster Diver 300M shape, including the crown-side controls and helium-valve position that buyers should review from side-case images. Case thickness, lug width, weight, clasp type, and confirmed water resistance are not specified, so this version should be evaluated through the provided listing details and current QC images rather than inferred technical assumptions.
The stainless steel Milanese mesh bracelet is the main style difference from sportier rubber-strap or standard bracelet configurations. It softens the black diver look and gives the watch a more polished wearing profile, making it a better fit for buyers who want a black Seamaster-style replica that can read less tool-focused without moving into a dress-watch layout.
The VS Calibre 8800 automatic movement is listed for this version and is visible through the sapphire crystal case back. Treat the case-back view as a presentation and QC checkpoint: request clear photos of the rotor, bridge layout, and finishing alignment, while keeping movement performance expectations separate unless actual timing data is supplied.
Watch Evaluation Highlights
VS Factory Black Wave Configuration
This listing is defined by the VS Factory context, black wave dial, black ceramic bezel, and Milanese mesh bracelet. Confirm the exact current version through QC photos rather than relying on factory naming alone.
Dial and Bezel Inspection
The black laser-engraved wave dial should be checked for even pattern depth, centered text, straight raised markers, and clean hand placement. On the bezel, review the 12 o’clock triangle, pip position, and white scale alignment.
42 mm Steel Case Profile
The described 42 mm 316L stainless steel case gives this version the familiar Seamaster Diver 300M outline. Use side photos to inspect polishing transitions, crown position, helium-valve placement, and overall case symmetry.
Milanese Mesh Wearing Style
The stainless steel Milanese mesh bracelet makes this black dial version read less strap-focused and slightly more refined than a rubber-strap configuration. QC photos should show mesh finishing, bracelet end fit, and clasp-area finishing if available.
VS Calibre 8800 Case-Back View
The listed VS Calibre 8800 automatic movement is visible through the sapphire crystal case back. Treat the movement view as a presentation check for rotor, bridge layout, and alignment; verified timing performance is not specified.
Specification Confirmation Points
Thickness, lug width, clasp type, wrist range, weight, water resistance, and verified movement data are not provided. Buyers who need those details should confirm them before choosing this configuration.
Known Flaws
- Inspect the black wave dial for even engraving depth, centered text, and clean printing around the minute track. The dark dial makes small spacing or print issues easier to notice in close-up QC photos; for most buyers, minor dial variation is a moderate concern because it affects the first visual impression.
- Check the raised hour markers and skeletonized hands for straight placement, balanced lume fill, and clean edges. Misaligned markers or uneven hand finishing can stand out against the black wave background; this is usually a medium-to-high priority QC point because it is visible from the front.
- Review the black ceramic bezel insert, especially the 12 o’clock triangle, pip position, and white diving scale alignment. Bezel misalignment changes the symmetry of the watch face; slight variation may be acceptable to some buyers, but a visibly off-center pip or triangle is a serious visual issue.
- Look at side-case photos for case thickness impression, polishing transitions, crown position, and helium-valve placement. Exact thickness is not specified, so the practical concern is whether the case profile looks balanced and clean in photos; this is a moderate issue unless the case shape appears obviously uneven.
- Inspect the Milanese mesh bracelet for even mesh texture, secure end fit, and clasp-area finishing if shown. The bracelet is a key style feature of this configuration, so poor fit or rough finishing can affect both appearance and comfort; most buyers should treat this as a medium-priority check.
- Request a clear case-back photo of the VS Calibre 8800 presentation and observe rotor alignment, bridge layout, and general movement behavior if video is available. This should be treated as a visual QC check only, since verified timing performance is not provided; it is important for buyers who care about the display-back view.
If you’re comparing China super clone Omega Seamaster pieces, the real differences rarely show in studio photos. They show in how the ceramic bezel grips when your hands are damp, how the bracelet settles on the wrist during a full day, and how stable the movement stays after a few months of routine wear. Our full China super clone Omega Seamaster guide lays these details out side by side so you can judge the build without pressure or factory hype.
