Reference and Colorway Clarification
This listing identifies the watch as an IWC Aquatimer Automatic 2000 IW358002 GR Factory replica. The product title uses White/Blue Dial wording, while the supplied image metadata describes a blue dial. For buyer clarity, this page should be read as a blue Aquatimer-style configuration with white dial markings unless the current product-specific QC photos show otherwise.
The main identity points to confirm are the IW358002 reference, GR Factory version, blue bezel treatment, blue rubber strap, and the exact dial color shown in neutral-light photos. The Aquatimer Automatic 2000 name describes the model-family design context; it should not be treated as evidence of tested water resistance.
Large Case Profile and Bezel Architecture
The description states a 46 mm case size, which places this IW358002 replica in a large, instrument-style wearing category. Because no structured product attributes are supplied, buyers should request measured case diameter, thickness, and lug-to-lug length before relying on the stated size.
The listing describes an external bezel that controls an internal rotating ring. In QC photos, the most important checks are alignment between the external bezel and internal ring, clean positioning at reference markers, and even printing on the blue bezel scale. The white numerals should appear sharp, with no visible bleeding or soft edges.
The case is described as 316L stainless steel with a restrained brushed finish. Since this is not confirmed by structured attributes, case material and surface finishing should be checked through close-up photos of the case flank, lugs, crown side, and caseback.
Dial Balance and Legibility Checks
The supplied image metadata identifies the watch as a blue dial IW358002, while the title includes White/Blue wording. This may mean a blue dial with white markings, but the exact colorway should be confirmed from current photos before selection.
The dial layout should be inspected for marker placement, printing edges, hand alignment, and the relationship between the blue dial surface, white markings, and blue bezel. Useful QC angles include a straight-on dial photo, a low-angle crystal photo, and a neutral-light wrist or tray image.
-
The broad minute hand should be easy to distinguish from the hour hand
-
The applied markers should sit evenly around the dial
-
The seconds hand should align cleanly with the printed track where visible
The date window at 3 o’clock is another key checkpoint. Ask for a clear close-up showing date centering, date-wheel height, and whether the aperture edges are clean.
Crystal, Markers, and Low-Light Details
The listing states a flat sapphire crystal with internal anti-reflective treatment. Because crystal material and coating are not independently verified in the supplied attributes, buyers should inspect photos for reflection color, distortion at the dial edge, and clarity over the date window.
Luminous details should be treated as a visual inspection point rather than a performance claim. Photos can help confirm whether the hand and marker inlays are placed evenly, but they do not verify lume duration, brightness, or low-light performance.
Movement Configuration
This GR Factory Aquatimer listing states an ETA 2824-based automatic movement. That is a catalog-description claim, not a verified movement report. If movement configuration matters, request a caseback or movement photo where available, along with any visible movement markings.
Movement-related points to confirm include:
-
Whether the installed movement is ETA 2824-based or another compatible automatic caliber
-
Whether a movement photo is available for this exact unit
-
Whether timekeeping, amplitude, frequency, or power reserve data has been measured
-
Whether the solid caseback matches the listed configuration
No claim should be inferred about accuracy, reliability, serviceability, or long-term movement behavior unless product-specific test data is supplied.
Blue Rubber Strap and Buckle Details
The description states a blue rubber strap with a stainless steel pin buckle. The strap is important on this IW358002 colorway because the bezel, dial, and strap all need to work together visually.
Before selection, compare the strap color against the blue bezel and blue dial in the same lighting. Also check the strap fit at the case, buckle finishing, hole spacing, and whether the strap profile suits a large 46 mm-style case.
Best Fit and Not Ideal For
This GR Factory IW358002 replica is best suited to buyers seeking a large Aquatimer-style watch with a blue bezel, blue rubber-strap setup, high-contrast dial furniture, and a practical tool-watch appearance. It is also a better fit for buyers who are comfortable reviewing QC photos before confirming the exact dial color and factory configuration.
It may not be ideal for buyers who prefer compact wrist proportions, documented pressure testing, an exhibition caseback, or fully verified technical specifications. The model-family name and 2000 wording should not be used as proof of swimming, diving, or pressure-resistance suitability.
Product-Specific QC Priorities
For this IW358002 listing, QC review should focus on the colorway contradiction first: confirm whether the dial is blue, white/blue, or blue with white markings. After that, inspect the bezel system, internal rotating ring, date window, case proportions, strap color match, and any available movement evidence.
Recommended photos include a straight-on dial image, bezel and internal-ring alignment at reference positions, date close-up, hand and marker close-up, crystal reflection angle, brushed case-side view, strap-to-bezel comparison, buckle photo, caseback photo, and movement photo if accessible.
GR Factory IW358002 Verification Snapshot
| Verification Area | Current Listing Data | Buyer QC Check |
| Dial and Colorway | Title says White/Blue; image metadata says blue dial | Confirm exact dial color in neutral-light photos |
| Case Size | Description states 46 mm | Request measured diameter, thickness, and lug-to-lug |
| Movement | Description states ETA 2824-based automatic | Request movement photo or test data if available |
| Bezel System | External bezel controls internal rotating ring | Check ring alignment, marker position, and printing edges |
This GR Factory IWC Aquatimer Automatic 2000 IW358002 replica is best evaluated through reference confirmation, dial-color verification, large-case measurements, and product-specific QC photos rather than unsupported performance or comparison claims.
Design Background
The IWC Aquatimer Automatic 2000 IW358002 GR Factory replica is positioned as a large Aquatimer-style automatic watch with a blue tool-watch identity. The product title uses White/Blue Dial wording, while the supplied image metadata and short description identify a blue dial; for this module, the safest reading is a blue dial configuration with white markings, pending confirmation from current product-specific QC photos.
The design centers on a prominent blue bezel system, an internal rotating ring described as being controlled by the external bezel, high-contrast dial furniture, and a date display at 3 o’clock. These elements make the color match between the blue bezel, blue dial surface, white printing, handset, marker inlays, and blue rubber strap especially important before comparing this version with other Aquatimer listings.
The description states a 46 mm case size, a brushed 316L stainless steel case, a flat sapphire crystal with internal anti-reflective treatment, and a blue rubber strap with a stainless steel pin buckle. Because no structured attributes confirm the dimensions or materials, buyers should treat the case diameter, thickness, lug-to-lug length, crystal specification, and strap details as listing-stated values that need photo or measurement confirmation.
GR Factory designation and the stated ETA 2824-based automatic movement help define the version being evaluated, but they should not be expanded into performance, reliability, or accuracy claims. This IW358002 configuration attracts buyers who want a large blue Aquatimer-style replica with a restrained dive-instrument look, while also being willing to verify the dial color, bezel-to-ring alignment, case proportions, crystal reflections, and movement configuration through QC images.
Best For / Not Ideal For
Best For
- Buyers who want a large Aquatimer-style replica with the listing-stated 46 mm case profile and a strong blue tool-watch presence.
- Buyers who prefer a blue bezel and blue rubber strap configuration, especially if they are willing to confirm the dial color from current QC photos.
- Buyers who prioritize high-contrast dial legibility, clear handset separation, applied marker placement, and a date display that can be checked before selection.
- Buyers comfortable reviewing product-specific QC images for bezel-to-internal-ring alignment, date centering, printing edges, strap color match, and case finishing.
- Buyers evaluating the stated ETA 2824-based automatic movement as a listing claim and willing to request movement photos or test data if movement details matter.
Not Ideal For
- Buyers who prefer compact, discreet, or thin watches; the stated 46 mm case places this replica in an oversized visual category.
- Buyers who need the White/Blue versus blue dial wording resolved before considering the watch and do not want to rely on photo confirmation.
- Buyers who require documented pressure testing or verified water-resistance data, since the Aquatimer Automatic 2000 name does not establish diving suitability.
- Buyers who expect fully verified technical specifications for case thickness, lug-to-lug length, crystal, strap width, movement grade, timing, or power reserve.
- Buyers comparing factories by performance rankings or accuracy claims, because this listing is better assessed through visible QC points than unsupported comparisons.
Watch Evaluation Highlights
GR Factory Version Check
This listing identifies the watch as a GR Factory replica of the IWC Aquatimer Automatic 2000 IW358002. Confirm the factory version against the current product-specific QC photos, especially if the caseback, movement view, or supplier notes are available for this exact unit.
Dial Color Confirmation
The title uses White/Blue Dial wording, while the supplied image metadata describes a blue dial. Treat the watch as a blue-dial configuration with white markings only after checking neutral-light dial photos that show the bezel, dial surface, hands, markers, and date window clearly.
Large Case Profile
The description states a 46 mm case size, placing this IW358002 in a large Aquatimer-style category. Because structured dimensions are not supplied, request measured diameter, case thickness, and lug-to-lug length before judging wrist fit or comparing it with smaller automatic watch options.
Bezel and Internal Ring
The listing describes an external bezel controlling an internal rotating ring. QC review should focus on alignment at the reference markers, even printing on the blue bezel scale, centered internal-ring positioning, and clean separation between the bezel numerals and dial markings.
Movement Claim
The catalog description states an ETA 2824-based automatic movement, but no independent movement report is supplied. Buyers who care about movement configuration should request a movement photo or visible markings and avoid assuming accuracy, power reserve, or reliability without test data.
Blue Strap Match
The description states a blue rubber strap with a stainless steel pin buckle. Compare the strap color with the blue bezel and dial in the same lighting, then check strap fit at the case, buckle finishing, and whether the strap proportions suit the stated large case format.
With Aquatimer replicas, case proportions and strap integration usually define the wearing experience. IWC Aquatimer replica comparison guide.
